All About Locksmith Journal News

How to Start the Car with a Bad Ignition Switch: A Step by Step guide

Apr 29

The ignition switch on your car is a vital component. The ignition switch starts your engine and allows you to drive it. If the ignition switch fails, you will not be able to begin your car or drive it to anyplace. Sometimes, an ignition switch can fail due to corrosion or weak connection. If this happens it is possible to take steps to start your car with a bad ignition switch. We'll explain how to fix this in this blog post.

What is the best way to Start a Car with a Bad Ignition Switch?

There are many things you can do to get your car back on track when your ignition switch has gone not working. Start by checking the battery. Verify whether the battery is properly connected and that there is sufficient energy. If the battery appears to be good then proceed to the next step.

Then, you should inspect the starter. The starter is what turns the engine. If the starter is not working properly or damaged, you will not be capable of starting your vehicle. Test the starter by turning on the headlights and seeing if they dim when you turn the ignition. If they do not dim, the starter could be defective and needs to be replaced.

If both the starter and battery are working, it's likely that the ignition switch is defective. To fix it you'll need the switch replaced.

A majority of auto parts shops offer ignition switches. Installation is fairly simple however if you're not confident doing it yourself or are not confident, you could bring it to a professional and let them install it for you.

How to Start the Engine of a Car With a Problem Ignition

These steps can help you wire an old car.

  • Locate the ignition wires
  • Remove the insulation from the wires at the ends
  • Connect the wires together
  • To move into the starting position, turn the key

Start your car! If the car won't start, then you may have connected the wires wrong. Make sure you connect them in a different sequence and see if that helps.

If you now know how to start a car that has an ignition switch malfunction You'll be back to driving quickly! Take your time and be sure to be safe while working on your vehicle. Always speak to an expert mechanic if you need help. They will be able to help you out and ensure that the job is done correctly.

If you own a contemporary vehicle, it could be challenging to connect it to the hotwire. This is because most new cars have what's called an immobilizer system. The system stops the car from starting without the key. So, if your ignition switch is defective and you don't have a spare keys and you're out of luck. There are solutions to the immobilizer system.


You might have wondered How to Start a Car that has a bad Ignition Switch? It could be difficult but it's possible. If you have a spare key it is the ideal solution. If you don't have a spare or a spare key, you may try to bypass the immobilizer mechanism. If you have any concerns you should consult a professional mechanic. They can help you out and make sure that everything is done correctly. Thanks for reading!

We hope that this article was helpful. If so, share it with your friends or family who may need advice about their vehicle! Until next time!